Installation of acoustic panels
Wood on walls acoustic panels are easy to install on both walls and ceilings.
Installation
Sound absorption class D
To achieve absorption class D, the acoustic panel is mounted directly on the wall or ceiling by using adapted screws for the substrate in the correct color for the acoustic felt for concealed fastening.
WE RECOMMEND
__________________________
2400 mm panels are mounted with
– 15 wall mounting screws
– 30 mounting screws for roof
2700 - 3000 mm panels are mounted with
– 18 wall mounting screws
– 36 mounting screws for roof
__________________________
FOR INSTALLATION YOU NEED
– Circular saw
– Spirit level
– Screwdriver
– Carpet knife
– Measuring tape
– Screw
– Jigsaw (for electrical outlets only)
– Curved file (only for LED strips)
– Hole saw (for electrical outlets only)
The acoustic panels can be easily cut to any size.
The easiest way to do this is with a fine-toothed saw. The underlying acoustic felt is easiest to cut with a utility knife. If you want to have your acoustic panels cut by us to a different size, there is an additional cost of 150 SEK/cut.
Installation
Sound absorption class A
To achieve absorption class A (best absorption class), install
The acoustic panel is mounted on 45 mm thick joists with 45 mm thick insulation behind the panels. The joists are mounted with 600 mm cc spacing on the wall and 300 mm cc spacing on the ceiling.
WE RECOMMEND
__________________________
2400 mm panels are mounted with
– 15 wall mounting screws
– 30 mounting screws for roof
2700 - 3000 mm panels are mounted with
– 18 wall mounting screws
– 36 mounting screws for roof
__________________________
FOR INSTALLATION YOU NEED
– Circular saw
– Spirit level
– Screwdriver
– Carpet knife
– Measuring tape
– Screw
– Jigsaw (for electrical outlets only)
– Curved file (only for LED strips)
– Hole saw (for electrical outlets only)
Installation
Wall Installation Glue
It is also possible to glue the acoustic panel directly to the wall with a quick-drying mounting adhesive. We recommend applying the adhesive in a thick bead as shown in the illustration on the left.
__________________________
FOR INSTALLATION YOU NEED
– Circular saw
– Spirit level
– Carpet knife
– Measuring tape
– Screw
– Jigsaw (for electrical outlets only)
– Curved file (only for LED strips)
– Hole saw (for electrical outlets only)
Have you forgotten something?
See our accessories
